52/92X Optical Zoom 1080P Anti-Fog Defogging 2000m Laser IR Thermal Imaging Onvif IP67 IP PTZ Camera

Key Features
  1. Support mainstream network module in the market
  2. Support bilateral equipment warehouse
  3. Support laser, infrared thermal imaging, zoom infrared light, ultrasonic, etc.
  4. Remote optical axis adjustment: adjustment via IE browser and client software
  5. Support wireless antenna transmission
  6. Support 12VDC, 24VDC, 24VAC power supply
  7. Worm gear and worm drive, with self-locking function
  8. Minimum power consumption≤12W
  9. Protection grade: IP67
  10. Compatible with GB28181, Onvif
Product Highlight
  1. Low power consumption, the smallest can reach ≤12W;
  2. High reliability, protection grade IP67;
  3. Remotely reset the system and upgrade firmware through the network;
  4. Support GPS/Beidou, dual-mode positioning and time calibration (optional);
  5. Worm gear and worm drive, with self-locking function
Model SVN-33PTX900X
Sensor 1/1.8" Progressive scanning CMOS
Total pixels 2.0MP
Minimum illumination Color:0.0005Lux@(F1.4,AGC ON), b/w:0.00001Lux(F1.4,AGC ON)
Video resolution 50Hz: 25fps(1920*1080,1280*960,1280*720); 60Hz:30fps(1920*1080,1280*960,1280*720)
Lens focal length F=6.1~317mm52x optical zoom F=6.1~561mm92x optical zoom
Lens aperture F1.4~4.7,automatic / manual
Electronic Shutter 1/25~1/100000s,automatic / manual
Day/Night Switch ICR
Fill light Laser module Infrared thermal imaging
Complement distance <=2000m >=3000m Vanadium oxide uncooled infrared focal plane detector
Light emission wavelength 808±10nm 384x288/17um 640x512/17um
Laser chip power 2.0W <5W
Control mode 485 Control 19mm~100mm
Pan Range 360° Continuous
Speed (H) 0.1~50°/S 0.1~15°/S
Tilt Range -90~90°
Speed (V) 0.1~100°/S 0.1~15°/S
Positioning accuracy ±0.15°
3D function supports the functions of picture frame enlargement, target locking and field center
Information display Time OSD, custom OSD
Automatic cruise Support, focal length matching with PTZ speed, 8 cruise scans
Watch function On/off, automatically call the preset point after staying in the idle state for a specified time
Remote upgrade Support remote upgrade of movement and gimbal at the same time
communication protocol PECLO+VISCA
Real-time angle return Support real-time angle return or query angle return function
Angle control Support
Preset points cruise Support 255 preset positions
Driving mode Synchronous belt Worm gear
Behavior detection Cross-border detection, regional intrusion, entry area, departure area, defect detection, rapid movement, personnel gathering, illegal parking, remnant detection, item removal detection
Intelligent Recognition Face detection
Abnormal detection Scene change detection, audio steep rise / steep fall detection, audio presence detection, virtual focus detection
PTZ Interface
Communication Interface 1 channel adaptive RJ45 Ethernet port
RS485 controller interface Support adaptive Pelco-P, Pelco-D and other protocols, baud rate 2400, 4800, 9600, 19200 optional
External input 2 channel alarm input
Output port 2 channel alarm output / 1 channel relay output
Application Programming Interface Support ONVIF 2.0, GD 28181 protocol, support SDK and third-party platform access
Auxiliary function
Smart wiper Manual control, speed gear is optional
Fan/heating Real-time temperature detection, pure physical detection
Waterproof respirator Built-in 2 waterproof respirators to reduce fog and condensation
GPS positioning GPS/Beidou, dual-mode positioning and time adjustment (optional)
Power Supply DC12V/5.0A, DC24V/6A
Power Consumption  88W (minimum) / ≤ 140W (infrared lamp on, low temperature start) ≤ 12W (minimum) / ≤ 18W (thermal imaging on)
Working Environment -40ºC~60ºC,0~95%(no condensation)
Protection level IP67, built-in 4000V lightning protection, anti-surge and anti-surge protection
Installation method Column, wall, corner
Entry cable Side outlet
Dimension L490.0mm×W205.0mm×H350.0mm L490.0mm×W205.0mm×H290.0mm
Product weight 10kg
Bearing weight 5kg (Including module protective cover)
Bearer mode Side load